The best ENERGY STAR water dispensers cut electricity use for hot and cold water, which matters because these appliances stay powered all day. ENERGY STAR says certified water coolers use about 22 percent less energy than conventional ones. Not every dispenser marketed as efficient is on the official list, so this guide flags which listings state ENERGY STAR and which do not.
As an Amazon Associate, Casabux may earn from qualifying purchases. This does not change the price you pay.
This guide is based on manufacturer listings and customer reviews on Amazon at the time of writing, not hands-on testing. Always confirm a model on the ENERGY STAR certified product finder before relying on the label, because listings can be loose with wording.
What ENERGY STAR Means for Water Dispensers
ENERGY STAR covers bottled and point-of-use (bottleless) water coolers, including hot and cold models. It does not cover units that make and dispense ice, and it excludes wall-mounted, under-sink and building-integrated pressurized units. If you want a model with ice, see our water dispensers with ice makers guide.
ENERGY STAR Claims in the Listings at a Glance
| Model | Type | ENERGY STAR in the listing |
|---|---|---|
| Brio 130SS | Top-load, hot and cold | Not stated |
| Avalon A4BLWTRCLR | Bottom-load, hot, cold, room | Not stated |
| Avalon A7BOTTLELESSBLK | Bottleless, touchless | Not stated |
| Avalon A13-S | Bottleless, under-sink style | Not stated |
| Clover B7A | Bottled, hot and cold | Stated |
| Clover B7B | Bottled, cold and room | Stated |
| Avalon bottom-loading self-cleaning | Bottom-load, hot, cold, room | Stated |
Where the listing does not mention ENERGY STAR, treat the model as a good hot and cold option but not a certified one until you verify it.
How to Choose an Efficient Water Dispenser
- Certification: verify the exact model number on the official ENERGY STAR product finder.
- Hot water: a unit with a hot tank uses more standby energy; skip it if you only drink cold water, or look for a heating on/off switch.
- Safety: choose a child safety lock on the hot tap for homes with children.
- Loading style: bottom-loading avoids lifting a bottle that weighs around 40 pounds; bottleless needs a water line and filters.
- Size and weight: measure ceiling and wall clearance and check the listed dimensions.
- Warranty and service: read the terms, because filters and wear parts are often excluded.
For a broader overview, see our home and office dispenser guide.
Brio 130SS Top-Load Water Dispenser, Hot and Cold

The Brio 130SS is a top-loading hot and cold dispenser for 3- and 5-gallon bottles. The listing describes a no-spill bottle system, LED indicators, a two-step child safety lock and no-plumbing setup. The listing does not state ENERGY STAR certification.
Best for: households and offices that want a simple top-loading hot and cold dispenser.
Pros
- No plumbing needed
- Child safety lock on the hot tap, per the listing
Cons
- Top-loading means lifting a heavy bottle
- No ENERGY STAR claim in the listing
Check the Brio 130SS on Amazon
Avalon A4BLWTRCLR Bottom Loading Water Cooler Dispenser

The Avalon A4BLWTRCLR is a stainless steel bottom-loading cooler for 3- to 5-gallon bottles with hot, cold and room-temperature water. The listing describes a nightlight, an empty-bottle indicator and a BioGuard coating, with a weight of 38.1 pounds. ENERGY STAR is not stated in the listing.
Best for: homes and offices that want three temperatures and easier bottle changes.
Pros
- Bottom loading
- Three temperature options
Cons
- Heavier at about 38 pounds
- ENERGY STAR not stated in the listing
Check the Avalon A4BLWTRCLR on Amazon
Avalon Self-Cleaning Touchless Bottleless Water Cooler

The Avalon A7BOTTLELESSBLK is a freestanding bottleless cooler. The listing describes touchless dispensing, a child safety lock, a self-cleaning function, dual sediment and carbon block filters rated for about six months or 1,500 gallons, installation hardware and a one-year warranty. ENERGY STAR is not stated.
Best for: households and small offices with a water line that want a slim, bottle-free unit.
Pros
- No bottles to buy or lift
- Touchless and self-cleaning, per the listing
Cons
- Needs installation and filter changes
- ENERGY STAR not stated in the listing
Check the Avalon A7BOTTLELESSBLK on Amazon
Avalon A13-S Touchless Bottleless Water Cooler with BioGuard

The Avalon A13-S is a bottleless unit with an under-sink style installation. The listing describes a touchless sensor, a digital display, a nightlight, an ozone self-cleaning function, dual filters rated for about 1,500 gallons, a leak detector and a one-year warranty. The listing does not state ENERGY STAR. Read the listing for filter certifications before relying on any contaminant claim.
Best for: people who want a hands-free bottleless cooler and are comfortable with under-sink installation.
Pros
- Touchless sensor with display
- Leak detector included, per the listing
Cons
- Needs a connection to your water line
- Higher cost and a more involved setup
Check the Avalon A13-S on Amazon
Clover B7A Hot and Cold Water Dispenser

The Clover B7A is a bottled hot and cold dispenser. The listing says it meets ENERGY STAR requirements and describes stainless steel tanks, a cold thermostat with a listed range of about 35.6 to 53.6 degrees F, hot water kept near 185 degrees F and a convection-cooled condenser. Confirm the exact model in the ENERGY STAR product finder.
Best for: offices and homes that want hot and cold water from a quiet dispenser.
Pros
- ENERGY STAR stated in the listing
- Adjustable cold thermostat
Cons
- Hot water temperature is not adjustable
- Not suited to very high-volume use
Check the Clover B7A on Amazon
Clover B7B Room Temperature and Cold Bottled Water Dispenser

The Clover B7B is a bottled dispenser with cold and room-temperature water only, no hot tap. The listing gives about 14 x 14 x 40 inches and 35 pounds, describes a stainless steel tank and a removable drip tray, and states ENERGY STAR plus CE, NSF and UL listings. Check the certifications on the listing and the ENERGY STAR finder.
Best for: homes and offices that want cold water without a hot tap or the extra standby energy.
Pros
- No hot tank, so less to maintain and no scald risk from a hot tap
- Compact footprint
Cons
- No hot water and no built-in filtration
- Needs 5-gallon bottles
Check the Clover B7B on Amazon
Avalon Self-Cleaning Bottom Loading Water Cooler

This Avalon bottom-loading cooler fits 3- to 5-gallon bottles and offers hot, cold and room-temperature water. The listing describes ozone self-cleaning, a child safety lock, a nightlight, an empty-bottle indicator, a one-year limited warranty and states ENERGY STAR approval. Verify the exact model in the ENERGY STAR finder.
Best for: households that want bottom loading with a self-cleaning feature.
Pros
- Bottom loading
- ENERGY STAR stated in the listing
- Child safety lock
Cons
- Heavy and bulky
- Needs bottle supply
Check the Avalon Self-Cleaning Bottom Loading Cooler on Amazon

Ways to Use Less Energy With Any Dispenser
- Place it where air can reach the vents and away from ovens, heaters and direct sun.
- If it has a heating switch, turn the hot tank off when nobody needs hot water.
- Clean dust from the cooling vents or coils as the manual directs, with the unit unplugged.
- Sanitize and descale on schedule so the unit does not work harder than needed.
Related Guides
Frequently Asked Questions
What does ENERGY STAR mean on a water dispenser?
ENERGY STAR is a government-backed efficiency label. Certified water coolers use less energy than conventional models, with ENERGY STAR citing about 22 percent less. The category covers bottled and point-of-use coolers, including hot and cold types, but it excludes units that make and dispense ice.
How do I check that a water dispenser is really ENERGY STAR certified?
Look up the exact brand and model number in the official ENERGY STAR certified product finder for water coolers. Listings sometimes use the phrase loosely, and a similar model name may not be the certified one, so confirm before you rely on it.
Do hot and cold dispensers use a lot of electricity?
They can, because they keep water hot and cold all day. An efficient model reduces standby use, and you can cut energy further by placing the unit away from heat, keeping vents clear and following the manual. Some models include a switch to turn off heating.
How often should I sanitize a dispenser’s water lines?
Follow the manual. Many manufacturers suggest sanitizing the reservoir and lines every few months, and wiping the spout and drip tray more often. Replace filters on the printed schedule, and clean sooner if you notice odor, slime or changed flow.
Is a bottleless dispenser more efficient than a bottled one?
Not automatically. Efficiency depends on the heating and cooling system, insulation and standby use, not the water source. Bottleless units also add filters and installation, so compare certification and the manufacturer’s stated power use rather than assuming.
Conclusion
For a bottled hot and cold unit, the Clover and one of the Avalon listings state ENERGY STAR, while the others are good options without that claim. Verify any model in the ENERGY STAR finder before you buy, and pick the loading style and safety features that match your space.