To use a steamer saucepan, pour about 1 inch of water into the saucepan, set the steamer insert or basket on top, bring the water to a boil, add the food and cover with a lid. The steam cooks vegetables, fish and dumplings in minutes, and a small saucepan is ideal for one or two servings.
This guide is for small-batch steaming in a saucepan with a steamer insert or a collapsible basket. If you want to steam big batches or use multiple tiers, read our guide on how to use a steamer pot.
What Is a Steamer Saucepan?

A steamer saucepan is a regular saucepan, usually 1.5 to 3 quarts, paired with a perforated insert that sits on the rim or on a ledge inside. Some sets are sold as a saucepan with a matching steamer insert and lid. You can also make one by placing a collapsible steamer basket or a small metal trivet inside any saucepan with a tight lid. Not sure about the size? See how big 1.5 quarts is.
What You Need
- A saucepan with a steamer insert, or a collapsible steamer basket that fits inside.
- A tight-fitting lid. A good lid keeps steam in; see our pot lid guide.
- Tongs or a fork, and oven mitts.
- Optional: a heatproof plate or parchment for fish and dumplings.
Step-by-Step: Using a Saucepan Steamer
- Add water. Pour in about 1 inch of water. It should sit below the bottom of the insert, so the food does not touch it.
- Heat to a boil. Cover and bring the water to a boil over medium-high heat.
- Prep the food. Cut vegetables into pieces of the same size so they cook at the same time.
- Add the food. Put the insert in place, spread the food in a loose layer and cover.
- Lower the heat. Reduce to a steady simmer that keeps producing steam.
- Check at the minimum time. Open the lid away from your face and test with a fork.
- Serve right away. Season with salt, lemon, herbs, butter or oil after steaming.
How Much Water Do You Need?
About 1 inch is enough for most steaming in a saucepan, and this should last for 10 to 15 minutes. If you steam longer, check the water and add boiling water from a kettle. Too much water touches the food and boils it; too little can boil dry and scorch the pan.
Do You Put Boiling Water in the Steamer?
Start with cold or hot water, then bring it to a boil before adding food. Once the steam is rising, add the food and set the timer. Starting with already-boiling water from a kettle saves a minute or two.
Steaming Times for Small Batches
These are starting points for a single layer of food. Thicker pieces take longer.
| Food | Approximate time |
|---|---|
| Broccoli florets | 4 to 6 minutes |
| Green beans | 4 to 6 minutes |
| Sliced carrots | 5 to 8 minutes |
| Cubed potatoes | 10 to 15 minutes |
| Eggs in the shell (soft to hard) | About 6 to 12 minutes |
| Fish fillet | 6 to 10 minutes, until 145°F inside |
| Frozen dumplings | 8 to 12 minutes |
| Boneless chicken breast | 12 to 20 minutes, until 165°F inside |
How to Arrange Food for Even Steaming
- Spread food in a single, loose layer so steam can circulate.
- Put dense pieces, like potato chunks, in the center and tender items at the edge.
- Cut food to similar sizes.
- Steam quick-cooking vegetables separately from slow ones or add them partway through.
How to Tell When Food Is Done
Vegetables should be bright and just tender when pierced with a fork. Fish should flake and reach 145°F, and chicken should reach 165°F, as recommended by the USDA. Pull food out a minute early if you will serve it later, since it keeps cooking in its own heat.
Common Mistakes
- The lid does not fit, so steam leaks and times run long.
- Food touches the water.
- The saucepan boils dry on a long cook.
- The basket is crowded.
- Vegetables are left in the hot basket after cooking.
Safety, Cleaning and Care
Steam can scald, so use mitts and lift the lid away from you. After the pan cools, wash the saucepan and insert with warm soapy water. Dry well to prevent water spots. Check manufacturer guidance for dishwasher use; our guide to whether saucepans can go in the dishwasher explains the basics.
Frequently Asked Questions
How do you use a saucepan steamer?
Add about 1 inch of water to the saucepan, set the steamer insert on top, bring the water to a boil, add food in a single layer and cover. Steam until tender, checking at the minimum time, then serve right away.
How much water do I put in a steamer pan?
Use about 1 inch of water, keeping it below the bottom of the insert so the food does not touch it. For longer cooking times, check the level and add boiling water if needed so the pan does not boil dry.
Do I put boiling water in the steamer?
Bring the water to a boil before adding food, either in the pan or by starting with hot water from a kettle. Steam should already be rising when you add the food, so cooking times are accurate.
Can I steam without a steamer insert?
Yes. Place a collapsible steamer basket, a metal trivet or three balls of foil in a saucepan, add water below the rack, and set a heatproof plate on top. Cover tightly and steam as usual.
Conclusion
A steamer saucepan is a quick, low-fat way to cook small portions. Keep the water below the insert, bring it to a boil before adding food, cover tightly and check early so vegetables, fish and dumplings stay tender.